Homemade Pot Holders

Olivia Miller | Thursday, May 25, 2023

Many of us are looking for ways to reduce our carbon footprint and live a more sustainable lifestyle. One simple and practical way to do this is by making your own pot holders at home. Not only is it a fun and creative activity, but it also helps to reduce waste and promote a greener, more eco-friendly way of living.

In this article, we will discuss why store-bought pot holders are bad for the environment, the benefits of making your own, what you will need, and step-by-step instructions on how to make your own homemade pot holders.

Why Store-Bought Pot Holders are Bad for the Environment

  1. Made from Non-Biodegradable Materials

    Most store-bought pot holders are made from synthetic materials such as polyester, nylon, or silicone. These materials are not biodegradable and can take hundreds of years to decompose, contributing to the growing problem of plastic pollution in our landfills and oceans.

  2. Chemicals and Toxins

    The production of synthetic materials involves the use of chemicals and toxins that are harmful to the environment. These chemicals can also be released into the air and water during the manufacturing process, polluting our environment and potentially harming our health.

  3. Short Lifespan

    Due to the low-quality materials used in store-bought pot holders, they often have a short lifespan and need to be replaced frequently. This leads to more waste being generated and a continuous cycle of consumption and disposal.

Why Making Your Own is Better for the Environment

  1. Use of Sustainable Materials

    When you make your own pot holders, you have control over the materials used. You can choose to use sustainable and biodegradable materials such as cotton, hemp, or bamboo, which have a lower impact on the environment.

  2. Reduce Waste

    By making your own pot holders, you are reducing the amount of waste that goes into landfills. You can repurpose old fabrics or use scraps from other projects, minimizing the need for new materials and reducing your carbon footprint.

  3. Customizable and Durable

    Homemade pot holders can be customized to your liking and can be made to fit your specific needs. You can choose the size, shape, and design that works best for you. Additionally, homemade pot holders are often more durable than store-bought ones, meaning they will last longer and reduce the need for frequent replacements.

What You Will Need

  • Fabric: Choose a natural, sustainable fabric such as cotton, hemp, or bamboo. You can also repurpose old fabrics or use scraps from other projects.
  • Insulating Material: This can be a layer of cotton batting or an old towel.
  • Sewing Machine or Needle and Thread: A sewing machine will make the process faster and easier, but you can also hand-sew your pot holders if you do not have access to a machine.
  • Scissors: For cutting the fabric and insulating material.
  • Ruler or Measuring Tape: To ensure accurate measurements.
  • Pins: To hold the fabric in place while sewing.
  • Iron: For pressing the fabric and creating crisp edges.
  • Pot Holder Template: You can find templates online or create your own by tracing a pot holder onto a piece of paper.

Step-by-Step Instructions

Step 1: Prepare Your Materials

Wash and dry your fabric before starting to remove any shrinkage. Iron the fabric to remove any wrinkles and create a smooth surface for sewing.

Step 2: Cut Out Your Fabric and Insulating Material

Using your pot holder template, cut out two pieces of fabric and one piece of insulating material. You can use the same fabric for both sides of the pot holder or mix and match for a more unique design.

Step 3: Layer the Fabric and Insulating Material

Place one piece of fabric right side up, then place the insulating material on top, followed by the second piece of fabric right side down. Pin the layers together to hold them in place.

Step 4: Sew the Layers Together

Using a sewing machine or needle and thread, sew around the edges of the layers, leaving a small opening for turning the pot holder right side out. Be sure to backstitch at the beginning and end to secure the stitches.

Step 5: Trim the Edges and Corners

Trim the excess fabric and insulating material from the edges, leaving a small seam allowance. Trim the corners diagonally to reduce bulk when turning the pot holder right side out.

Step 6: Turn the Pot Holder Right Side Out

Through the opening, carefully turn the pot holder right side out. Use a pencil or chopstick to push out the corners and create crisp edges.

Step 7: Sew the Opening Closed

Fold in the edges of the opening and sew it closed using a needle and thread or a sewing machine.

Step 8: Press the Pot Holder

Using an iron, press the pot holder to create crisp edges and flatten any wrinkles.

Congratulations, you have now made your own homemade pot holder! Repeat these steps to make as many pot holders as you need.

Tips for Making Your Pot Holders More Sustainable

  • Use scraps of fabric or old clothing to make your pot holders.
  • Use organic or sustainably sourced fabrics.
  • Use natural dyes or eco-friendly fabric paints to add color and design to your pot holders.
  • Use recycled cotton or wool as insulating material.
  • Make your pot holders double-sided to increase their durability and lifespan.

In Conclusion

Making your own pot holders is a simple and practical way to reduce waste and promote a more sustainable lifestyle. By using sustainable materials and repurposing old fabrics, you can create unique and durable pot holders that are better for the environment. So next time you need a new pot holder, consider making your own instead of buying one from the store. Your kitchen and the planet will thank you.

© 2020 EthicalShift, Inc